Home Home Decor Gate Renovation Why and How to Motorize Your Gate

Gate Renovation Why and How to Motorize Your Gate

0
Gate Renovation Why and How to Motorize Your Gate

Gate Renovation Why and How to Motorize Your Gate

The installation of a motorization system is one of the possible works during the renovation of your gate. Adaptable to hinged and sliding supports, this automatic device makes it possible to trigger, using a remote control, the opening, and closing of the front door. Before equipping your home with such a device, it is necessary to know its advantages and how to install it.

Secure your Gate by Purchasing a Tailor-made Motorization Kit

Automating your gate secures your entrance through a remotely controlled mechanism. The equipment used to carry out this task comes in the form of a motorization kit that operates using electrical or solar energy.

 

What is the principle of the motorization of a gate?

The motorization consists of equipping a classic gate with an electronic system that can be remote-controlled. The installed device is composed of a gearbox, a motor, electric cylinders, a rack, and several gears. The simultaneous action of these components makes it possible to open and close the front door using a remote control, a coded keypad (wired or radio), or a key selector. Some automation includes additional tools such as an alarm, an obstacle detection system, and a flashing light.

You should know that the principle of motorization of a sliding gate in wood, metal, PVC, or aluminum is generally more reliable and less complex than that of a swing model. Indeed, the mechanisms that make up the support rolling on rails can be integrated into all types of entrances, whether narrow or wide. In addition, the movement of the opening rack is caused by a single motor, unlike a swing gate which requires two separate motorization devices.

 

What are the Advantages of a Motorized Gate?

A motorized gate is generally more manageable than classic support. Indeed, you just have to use the remote control to open the front door and close it after your passage. The remote control allows people with reduced mobility to gain autonomy when traveling.

In addition, the remote control of your gate saves you wasting time and the difficulty of manual gestures (opening and closing). Thus, you no longer have to get out of your vehicle to open the accesses, which saves you from possible disappointments in the event of bad weather.

In addition, the motorization of a gate reinforces the security of your home. The obstacle detector integrated in the automation system makes it possible to filter the entrances and exits of your residence. You can also prevent acts of vandalism by combining home automation elements (intercom, videophone, etc.) with existing installations.

 

How to Choose a Gate Motorization Kit?

To buy your motorization kit, first, take into account the type of gate you have. If it is a casement opening, weighing between 200 kg and 600 kg, you can choose a jack, wheel, arm (electromechanical or hydraulic), buried, or built-in automation system. In contrast, owners of sliding gates can only choose a self-supporting or rail mechanism.

Also, pay special attention to the remote control mode. Manufacturers offer remote controls, keys, and badges for this purpose which are used to trigger the automatic opening or closing of your front door. The length of the automation (fixed or adjustable) and the motorization power supply (wired or solar) are also criteria to consider when purchasing your automation kit.

 

Stages of the Motorization of a Gate

It is possible to motorize an existing gate using a motorization kit. However, the operation differs depending on the type of support (sliding or casement). Manufacturers usually include in their products a guide allowing you to mount the device with a few tools, without the help of a professional.

 

How to install the Motorization of a Sliding gate?

Rail automation is the most recommended technique for motorizing heavy or light sliding gates, in steel or solid wood. The first stage of assembly consists of turning off the power supply and making a small concrete base to accommodate the motor. On this foundation, position the fixing plate supplied in the kit in order to determine the places to be drilled.

Proceed with the actual drilling of the concrete support, then install the 4 dowels contained in the product packaging. Position the motor, screw it in, and fix the racks using the self-drilling screws. After checking the correct rotation of the motor’s notched wheel, place the end-of-travel bracket.

The last step in motorizing your sliding gate is to carry out the wiring in accordance with the diagram provided by the manufacturer. All you have to do is put your automated gate into service and test it using its remote control or digit code box.

How to install the motorization of a Swing Gate?

The assembly of the motorization of a swing gate starts with taking the dimensions between the outer edge and the hinge of the support. The measurements are taken on the two arms of the front door, before being carried over to the bumpy pillar. It follows the drilling of markings in percussion mode and the insertion of pegs having an identical diameter. The first motor block, considered the brain of the installation, is then fixed near the power supply. As for the second motorization, it is installed at the level of the second leaf of the gate.

In addition, you must fix the arms of the leaves in such a way as to obtain perfect mobility of the leaves. Subsequently, adjust the degree of opening of the gate before reassembling the protective casings. If you have planned to install obstacle detection and signaling equipment, you can put them in place. However, take care of their symmetry in order to obtain a gate that is both functional and aesthetic.

The last stage of the assembly consists of making the electrical connections via ICTA ducts or IRL tubes. Finally, power up the installation and test that it is working properly.

 

Gate renovation: Entrust your Motorization work to a Professional

Although it is possible to automate your own portal, by following the guide provided with the purchase, it is recommended to seek the intervention of a professional. Indeed, some motorization kits, in this case, those to be buried, require, depending on the case, masonry, electricity, or pipework. Only qualified craftsmen can take on these technical tasks and guarantee you a neat finish.

The intervention of the professional generally begins with an inventory allowing him to examine your gate and the type of ground on which it is fixed. He also takes note of your needs (type of motorization and aesthetics sought) and helps you to choose an electric gate model adapted to your budget.

 

Price 

The craftsman then offers you a tailor-made estimate which informs you of the amount of the kit selected, the preliminary work to be carried out, and the cost of the service. Note that on average, the price of automating a sliding or swing gate varies between 500 euros and 3000 euros.

Once you validate the quote provided by the professional (project manager), the latter begins the automation work by following a well-defined timeline. Depending on the nature of the renovation site, he can collaborate with several craftsmen (masons, electricians, etc.) who strive to provide you with a high-quality service. In addition, all work is carried out in strict compliance with the town planning standards in force in your region.

 


 

Also Read: Best Home Automation Systems in 2022

Exit mobile version